How to make the freshness cabinet not overloaded

Every electrical equipment has its service life, the same as the freshness cabinet, reasonable use and maintenance can effectively increase the service life, but if the long time overload work, then it will reduce its service life. So the use of freshness cabinet, pay attention to not let its overload work. Fresh cabinet overload mainly because of the cabinet temperature is high, not up to the target temperature set by the temperature controller, the general overload of the fresh cabinet is because of the use of fresh cabinet and maintenance is not appropriate, then how to make the fresh cabinet to ensure that it is not overloaded?

1. Environmental factors

Ambient temperature is too high, will lead to the internal temperature of the freshness cabinet is difficult to come down, which will lead to the freshness cabinet compressor non-stop work and overload, prolonged overload will reduce the service life of the compressor, and will burn the compressor when it is serious. Therefore, it is important to reduce the ambient temperature of the freshness cabinet, especially in summer, can effectively avoid the overload of the freshness cabinet caused by the ambient temperature.

2. Freshness cabinet location

Freshness of the cabinet itself will lead to poor heat dissipation compressor overload. There are two cases, one is the freshness cabinet is placed in a small space, resulting in poor heat dissipation; the other is the freshness cabinet for a long time without dust, condenser and compressor on the thick dust, resulting in the compressor and condenser can not be dissipated, the cooling effect is low, the compressor will not stop overloading the work. So avoid putting the cabinet in a small space, around the perimeter to leave more than 20CM cooling space, internal dust should be cleaned regularly.

3. Freshness cabinet quality

There is another reason for overloading the freshness cabinet, that is, buy poor quality freshness cabinet, its no insulation or insulation is very poor, the cold air leakage is serious, the internal temperature does not reach the temperature control setting temperature, resulting in freshness cabinet refrigeration system overload.